My Project is Britisch Armoured Forces Afghanistan.
I have been buzy the last years with collecting a realistic as possible gear from the British forces in Afghanistan.
As you can see here on the photo.
Let's take a closer look at the gear on the photo with some close-up photo's:
2 Jackets with on the right sleve the "Union Jack", and on the left sleve:
- one with the Yellow Tiger with blue backgound from the Army Tigers (PWRR <Princess of Wales Royal Regiment)
- the other one with the flag of Cymru (Wales).
(yes I know one jacket is laying a half twisted)
On the left of the shoes is the rank I'm wearing.
This os the rank of a Corporal (the same rank I had when I leaved the Dutch army
Then we have the Magnum desert boots also used in the BAF as patrol boots.
On the Right is my Yoke (not joke
) system. It can be carry underneath the Opsrey body armour. I use it when it is to hot for the Opsrey.
It is filled with:
2x double magazine pouch
3x dumppouce
1x bayonet pouce including bayonet (bayonet is rubber dummy) and sabbard
1x small radio pouche
And my helmet set:
- MK7 Helmet
- MK7 MTP Helmet cover
- MK7 Helmet net (there will soon be strips of MTP and Jute fabric <scrim> in it to break the shape of a head/helmet).
On the left my 3D printed bayonet.
In the middle: Opsrey body armour with:
- On left shoulder: my PRR/GPS radio pouche (fitted with my baofeng radio)
-left body side: medic bag with 1x Emergency bandage, 1x safety jacket
-left front body side: 1x double M4/L85 magazine pouche, 1x small pouche
-right front body side: 2x double M4/L85 magazine pouche, and behind it is my pistol(Glock17) holster and (not BAF) ToothSquadCombatKnife
-right body side: 1x dumppouce
-back: 2x plastic handcuffs, MTP Camelbag (can also be fitted on the Yoke)
And here my 2 Bayonets again with sabbard as it can be fitted on my SA80 or put away in the pouche.
And fot those who are woundering: Yes I also have a original Bayonet (see here).
With this gear I meaby also have the biggest SA80 collection:
From left to righ on the back:
-L85A1
-L22A2(L85AFV) With Susat
-L85A2 with LLM001 and Specter OS with Quarter Battlesight reflex sight
-L123A2 (grenadelauncer) can also hold the LLM001
on the front:
L86LWS with Susat
Missing on picture: Glock 17 pistol
UPDATE 14-02-2018:
Today I've put on my scrim to make my helmet more realistic. It's from a cutted trouwser I buyed at the local dump store
Because this is a Britisch loadout project I wrote it all in English.but reactions/questions can be wroten in Dutch if you prefer that.
I have been buzy the last years with collecting a realistic as possible gear from the British forces in Afghanistan.
As you can see here on the photo.
Let's take a closer look at the gear on the photo with some close-up photo's:
2 Jackets with on the right sleve the "Union Jack", and on the left sleve:
- one with the Yellow Tiger with blue backgound from the Army Tigers (PWRR <Princess of Wales Royal Regiment)
- the other one with the flag of Cymru (Wales).
(yes I know one jacket is laying a half twisted)
On the left of the shoes is the rank I'm wearing.
This os the rank of a Corporal (the same rank I had when I leaved the Dutch army
Then we have the Magnum desert boots also used in the BAF as patrol boots.
On the Right is my Yoke (not joke
) system. It can be carry underneath the Opsrey body armour. I use it when it is to hot for the Opsrey.It is filled with:
2x double magazine pouch
3x dumppouce
1x bayonet pouce including bayonet (bayonet is rubber dummy) and sabbard
1x small radio pouche
And my helmet set:
- MK7 Helmet
- MK7 MTP Helmet cover
- MK7 Helmet net (there will soon be strips of MTP and Jute fabric <scrim> in it to break the shape of a head/helmet).
On the left my 3D printed bayonet.
In the middle: Opsrey body armour with:
- On left shoulder: my PRR/GPS radio pouche (fitted with my baofeng radio)
-left body side: medic bag with 1x Emergency bandage, 1x safety jacket
-left front body side: 1x double M4/L85 magazine pouche, 1x small pouche
-right front body side: 2x double M4/L85 magazine pouche, and behind it is my pistol(Glock17) holster and (not BAF) ToothSquadCombatKnife
-right body side: 1x dumppouce
-back: 2x plastic handcuffs, MTP Camelbag (can also be fitted on the Yoke)
And here my 2 Bayonets again with sabbard as it can be fitted on my SA80 or put away in the pouche.
And fot those who are woundering: Yes I also have a original Bayonet (see here).
With this gear I meaby also have the biggest SA80 collection:
From left to righ on the back:
-L85A1
-L22A2(L85AFV) With Susat
-L85A2 with LLM001 and Specter OS with Quarter Battlesight reflex sight
-L123A2 (grenadelauncer) can also hold the LLM001
on the front:
L86LWS with Susat
Missing on picture: Glock 17 pistol
UPDATE 14-02-2018:
Today I've put on my scrim to make my helmet more realistic. It's from a cutted trouwser I buyed at the local dump store
Because this is a Britisch loadout project I wrote it all in English.but reactions/questions can be wroten in Dutch if you prefer that.
Laatst bewerkt:
.
