Tutorial how to install lipo battery in buffer tube

[b.samriey]

Here is video tutorial on how to install lipo battery in buffer tube.
I also recommend to use nylon Velcro Hook Loop cable to ties your stock cover just in case not to lose it in somehow (you can get free Velcro Hook Loop cable around your laptop AC power adapters).

https://www.youtube.com/watch?v=U7yLIRKpkwo

 

[Guest]

Don't get me wrong, and I haven't watched the video, but why a tutorial on cramming a battery in your buffer tube..? Seems pretty straightforward to me..

 

[Guest]

If you search on google you will find common question on how to install KWA Lipo battery in buffer tube using the first position collapsible stock, this because KAW has very tough wiring system in buffer tube make it difficult to us first ~ 4th collapsible stock which make the gun looks ugly with 6th position (as you can see in the picture below). But some other brands are using silicone wire which make it possible to use the first position but at the same time silicone wire are not safe to the motor or even trigger system.

 

[Guest]

Lol explain to me how silicone wire is not safe, because actually everyone says it is quite good for replacing wiring in the replicas.

 

[Guest]

Then don't hesitate to connect 11.1v lipo battery in your gun with no fuse using silicone wire and show it to me in video not i comment shooting at lest 120rd full auto, at the time do not blame someone except yourself.
Could you explain to me why the top line brands doesn't use silicone wire in buffer tubes?

 

[Guest]

Then don't hesitate to connect 11.1v lipo battery in your gun with no fuse using silicone wire and show it to me in video not i comment shooting at lest 120rd full auto, at the time do not blame someone except yourself.
Could you explain to me why the top line brands doesn't use silicone wire in buffer tubes?

You are already not a great help by recommending people to not add a fuse, what if I didn't know about the importance of a fuse and I would blow the internals of my gun? Yes I would blame you if anyone would try to do this without a fuse as you are the one recommending it.

Also I was asking you to explain why silicon wire is in any way bad, so I don't understand the sarcastic reaction. Also maybe they don't use silicon wire as it will cost more then standard copper 16 awg wire that is mostly used in the stock gearbox? I don't know I was asking you?

BTW you are better of using gilded bullet connectors, like 4 mm ones which have a better conductivity then a tinned spade connector. The bullet connectors are essentially the same thing used in XT60's.

Oh and this is a great way for new people to short circuit the lipo battery. A XT60 or T connector would also just work fine even in this small space.

 

[Guest]

Rebelattack, why would you think i was sarcastic?
I didn't mean that i was telling you in other words if you ignore the fact that the silicone wire not safe to the (motor and trigger system with Lipo) then go ahead try it by yourself and you will see the result. I really don't see any sarcastic in my comment..!
So if i said that in other worlds like: (if you driving your care in the rain with bad wiper then don't blame someone except yourself) is that make you feel that I am ridicule of you..?
The second thing i didn't recommend this method to any one, Jan didn't like the crane stock as I'm so i told him i modified the wires and I am using another way to store my batteries in buffer tube and will show it to you (to Jan) later in video. So if Jan like the idea he is free to follow it, if he didn't also he is free. No recommendation or insistence in this subject. Many videos on internet on how to jump from top roof building to another (shall we follow everything we see?).

 

[Guest]

There still are no facts or other proof as to why silicone wire is bad, so all you have done now is tell your opinion but putting it down like it is the truth. Tell me with actual facts or proof as to why silicone wire is bad? The rest of the first paragraph I cant understand your english.

As for the video you are making a video that is open for anyone to see and you post it on the forum. If it was for Jan specific then a private video and message would suffice, but indeed you dont have to jump of a bridge just because others do so. Anyway you could have also just replaced the stock and just use the normal connector and put the battery in the stock anyway and if the cable was too long could have cut it short and resolder the connector.

 

[RahelRish]

Hi..i am a new user here. I think you shouldn't hesitate to connect 11.1v lipo battery in your gun with no fuse using silicone wire and show it to me in video not i comment shooting at lest 120rd full auto, at the time do not blame someone except yourself.Could you explain to me why the top line brands doesn't use silicone wire in buffer tubes?

full turnkey assembly

 

[Sander]

Why necropost and quote a message from 6 months old?