Halo iedereen. ik ben vrij niew in airsoft. Ben lid van NABV sinds Januari. Mijn eerste Replica is een Cybergun Canik TP9. Maar ik merk dat de loop best wat speeling heeft als de slide naar vooren is ongeveer 0.5mm alle kanten op. ik weet dat dit niet normaal is bij een echte "real steel" versie. is dit normaal voor replicas met tilting loop design so als glock, browning? of is dit gewoon iets normaal binnen airsoft? ik heb wat tape om de loop gedaan zodat hij minder kan wiebelen tot dat ik een beetere oplossing vind. Bedankt alvast voor u reactie.
Hi everyone. im pretty new to airsoft. started this january. i purchased my first replica a Cybergun Canik TP9. i noticed that my barrel is quite loose when the slide is forward. about 0.5mm of play. i dont know if these are normal tollerances within airsoft. i know that the real steel version does not have any play. is this normal for airsoft pistols with browning style tilting barrel? i put some tape around the end of the barrel to minimise the wobble as you can see in the picture. at least until i find a better solution. im just wondering if i should contact the distributor about it or if its normal with airsoft replicas. Thanks in advance for any replies.
Hi everyone. im pretty new to airsoft. started this january. i purchased my first replica a Cybergun Canik TP9. i noticed that my barrel is quite loose when the slide is forward. about 0.5mm of play. i dont know if these are normal tollerances within airsoft. i know that the real steel version does not have any play. is this normal for airsoft pistols with browning style tilting barrel? i put some tape around the end of the barrel to minimise the wobble as you can see in the picture. at least until i find a better solution. im just wondering if i should contact the distributor about it or if its normal with airsoft replicas. Thanks in advance for any replies.
